Sep,26

ASME B30.27:2005 pdf download

ASME B30.27:2005 pdf download

ASME B30.27:2005 pdf download.Material Placement Systems
Volume B30.27 includes provisions that apply to the construction, installation, operation, inspection, and main- tenance of mobile material placing booms, mobile tele- scoping boom conveyors, separate placing booms, and material placement accessories (see Figs. 1 through 3). This Volume does not apply to the pumping ele- ments of a concrete pump, conveyors, mortar convey- ing or spraying machines, or dry mix shotcreting ma- chines. The concrete pump portion of these machines is cov- ered by CPMA 27-2000. The conveyor section of these machines is covered by ASME B20.1.
concrete delivery hose: a flexible delivery hose having a coupling on each end. control panel: controls mounted on the material place- ment system. delivery systems: delivery lines, pipes, hoses, attachment components, and transfer valves, through which mate- rial is transported (see Fig. 4). designated person: a person selected or assigned by the employer or the employer’s representative as being competent to perform specific duties. end hose: a flexible concrete delivery hose that only has one coupling. manual valve override: a mechanical valve actuator used to operate an electrically controlled valve in emergency or breakdown situations. manual valves: a valve whose manual actuator is the only means of valve actuation. maximum support force: the maximum force exerted on the supporting surface at any one outrigger. normal operating conditions: conditions during which a material placement system is performing functions within the scope of the original design. Under these con- ditions, no one other than the operator is on the mate- rial placement system.outrigger: extendable or fixed members attached to the mounting base, which rest on supports at the outer ends used to support the machine. placing booms: manual or power driven, slewable work- ing devices, consisting of one or more extendable or foldable parts supporting the material delivery system, and directing the discharge into the desired location. priority switching: transferring control of one or more functions from a control location to a different control location. qualified person: a person who, by possession of a recog- nized degree in an applicable field, or certificate of pro- fessional standing, or who by extensive knowledge, training, and experience, has successfully demonstrated the ability to solve or resolve problems relating to the subject matter and work. rated load: maximum allowable working load designated by the manufacturer. remote control: a portable control device connected to the machine by a wire cable or linked by radio or other means. safety device: a means placed in use for the specific pur- pose of preventing an unsafe condition. sheave: a grooved wheel or pulley used with a rope to change the direction and point of application of a pulling force. shortrigging: one or more outriggers not fully extended on the side away from the boom operational area. signal person: see spotter. specific type (of material placement system): a model, style, or size classification of material placement system (e.g., three section boom, four section boom, 50 meter class, conveyor). spotter: a signal person/spotter is a person positioned at a vantage point where both the point of discharge and the operator of the material placement system can be seen and relays information to the operator.
27-1.1.2 Material Placement System Rating and Identification Markings
The following information shall be legibly marked on a durable identification plate on the lower support struc- ture of the material placement system: (a) maximum working pressure of material place- ment system hydraulic circuit(s) (b) maximum material pressure, if applicable (c) maximum working pressure supplied to the boom hydraulic system

Download
The previous

ASME B16-36:2009 pdf download

The next

ASME B16.23:2021 pdf download

Related Standards