ASME SA-516:2019 pdf download
ASME SA-516:2019 pdf download.Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service 1. Scope 1.1 This specification covers carbon steel plates intended primarily for service in welded pressure vessels where im- proved notch toughness is important. 1.2 Plates under this specification are available in four grades having different strength levels as follows:1.3 The maximum thickness of...
ASME SA-210:2019 pdf download
ASME SA-210:2019 pdf download.SPECIFICATION FOR SEAMLESS MEDIUM-CARBON STEEL BOILER AND SUPERHEATER TUBES 1. Scope 1.1 This specification covers minimum-wall-thickness, seamless medium-carbon steel, boiler tubes and boiler flues, including safe ends (Note 1), arch and stay tubes, and superheater tubes. NOTE 1 — This type is not suitable for safe ending by forge welding. 1.2 The tubing sizes and thicknesses usually...
ASME SA-727-SA-727M:2021 pdf download
ASME SA-727-SA-727M:2021 pdf download.SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING COMPONENTS WITH INHERENT NOTCH TOUGHNESS 1. Scope 1.1 This specification covers forged carbon steel piping components intended primarily for service in pressure pip- ing systems from −20 to +650 °F [−30 to +345 °C] where inherentnotch toughness is desired, butwhere notch tough- ness testing is not required. Included are forged...
ASME SB-348:2017 pdf download
ASME SB-348:2017 pdf download.Standard Specification for Titanium and Titanium Alloy Bars and Billets 1. Scope 1.1 This specification covers annealed titanium and tita- nium alloy bars and billets as follows: 1.1.1 Grade 1—Unalloyed titanium, 1.1.2 Grade 2—Unalloyed titanium, 1.1.2.1 Grade 2H—Unalloyed titanium (Grade 2 with 58 ksi minimum UTS), 1.1.3 Grade 3—Unalloyed titanium, 1.1.4 Grade 4—Unalloyed titanium, 1.1.5 Grade 5—Titanium...
ASME SA-336:2019 pdf download
ASME SA-336:2019 pdf download.Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts 1. Scope 1.1 This specification covers ferritic steel forgings for boilers, pressure vessels, high-temperature parts, and associ- ated equipment. 1.2 Forgings made of steel grades listed in Specification A335/A335M, may also be ordered under this specification. The chemical, tensile, heat treatment, and marking require- ments of...
ASME SA-557-SA-557M:2021 pdf download
ASME SA-557-SA-557M:2021 pdf download.SPECIFICATION FOR ELECTRIC-RESISTANCE- WELDED CARBON STEEL FEEDWATER HEATER TUBES 1. Scope 1.1 This specification covers minimum-wall-thickness, electric-resistance-welded, carbon steel tubes including thosebent, ifspecified, into theformofU-tubes forapplica- tion in tubular feedwater heaters. 1.2 The tubing sizes covered shall be 1 ⁄ 8 to 1 1 ⁄ 4 in. [15.9 to 31.8 mm] outside diameter, inclusive, and wall thicknesses...
ASME SA-479:2019 pdf download
ASME SA-479:2019 pdf download.Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels 1. Scope 1.1 This specification covers hot- and cold-finished bars of stainless steel, including rounds, squares, and hexagons, and hot-rolled or extruded shapes such as angles, tees, and channels for use in boiler and pressure vessel construction. 2 N OTE 1—There...
ASME SB 160:2019 pdf download
ASME SB 160:2019 pdf download.SPECIFICATION FOR NICKEL ROD AND BAR 1. Scope 1.1 This specification covers nickel (UNS N02200), low carbon nickel (UNS N02201), and solution strength- ened nickel (UNS N02211) in the form of hot-worked and cold-workedrodandbarintheconditions showninTable1. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for...
ASME SA-334-SA-334M:2021 pdf download
ASME SA-334-SA-334M:2021 pdf download.SPECIFICATION FOR SEAMLESS AND WELDED CARBON AND ALLOY-STEEL TUBES FOR LOW- TEMPERATURE SERVICE 1. Scope 1.1 This specification covers several grades of mini- mum-wall-thickness, seamless and welded, carbon and alloy-steel tubes intended for use at low temperatures. Some product sizes may not be available under this speci- fication because heavier wall thicknesses have an adverse affect on...
ASME SA-376-SA-376M:2021 pdf download
ASME SA-376-SA-376M:2021 pdf download.SPECIFICATION FOR SEAMLESS AUSTENITIC STEEL PIPE FOR HIGH-TEMPERATURE CENTRAL-STATION SERVICE 1. Scope 1.1 This specification covers seamless austenitic steel pipe intended for high-temperature central-station service. Among the grades covered are five H grades and two nitrogen grades (304N and 316N) that are specifically intended for high-temperature service. 1.2 Optional supplementary requirements (S1 through S10) are provided. These...