ASME B30.5:2007 pdf download
ASME B30.5:2007 pdf download.Mobile and Locomotive Cranes Within the general scope defined in Section I, American National Standard B30.5 applies to crawler cranes, locomotive cranes, wheel-mounted cranes, and any variations thereof that retain the same fundamental characteristics. The scope includes only cranes of the above types that are basically powered by internal com- bustion engines or electric motors. Side boom...
ASME B18-16.6:2008 pdf download
ASME B18-16.6:2008 pdf download.Nylon Insert Locknuts (Inch Series) 11.2 Mechanical Requirements 11.2.1 Proof Load. Nuts shall withstand the proof load specified for the applicable grade and thread series in Table 2 or 3 when tested as specified in para. 12.1. 11.2.2 Hardness. Nuts shall have a hardness con- forming to the limits specified for the applicable grade in Table 5...
ASME B31.9:2020 pdf download
ASME B31.9:2020 pdf download.Building Services Piping This Building Services Piping Code is a Section of The American Society of Mechanical Engineers (ASME) Code for Pressure Piping, B31. This Section, herein called the Code, is published as a separate document for conveni- ence. Standards and specifications incorporated byreference in this Code are shown in Table 926.1, Mandatory Appendix I, and elsewhere....
ASME B31.3:2012 pdf download
ASME B31.3:2012 pdf download.Process Piping (a) Identification. This Process Piping Code is a Sectionofthe AmericanSociety ofMechanical Engineers Code for Pressure Piping, ASME B31, an American National Standard. It is published as a separate docu- ment for convenience of Code users. (b) Responsibilities (1) Owner. The owner of a piping installation shall have overall responsibility for compliance with this Code, and...
ASME B30.10:2005 pdf download
ASME B30.10:2005 pdf download.Hooks Within the general scope defined in Section I, ASME B30.10 applies to all types of hooks shown in Figs. 1 through 21 used in conjunction with equipment described in other volumes of the B30 Standard. Hooks supporting a load in a direct-pull configuration, with the load carried in the base (bowl/saddle or pin hole — see...
ASME B30.6:2015 pdf download
ASME B30.6:2015 pdf download.Derricks The ASME B30 Standard contains provisions that apply to the construction, installation, operation, inspec- tion, testing, maintenance, and use of cranes and other lifting and material-movement related equipment. For the convenience of the reader, the Standard has been divided into separate volumes. Each volume has been written under the direction of the ASME B30 Standard Committee...
ASME B18.2.9:2010 pdf download
ASME B18.2.9:2010 pdf download.Straightness Gage and Gaging for Bolts and Screws 1 SCOPE This Standard describes the gage and procedure for checking bolt and screw straightness at maximum mate- rial condition (MMC) and provides default limits when not stated in the applicable product standard. 2 COMPARISON WITH ISO 4759-1:2000 This Standarduses anadjustablegage, insteadofplain sleeve gages like the example shown in...
ASME B18.21.3:2008 pdf download
ASME B18.21.3:2008 pdf download.Double Coil Helical Spring Lock Washers for Wood Structures 1 INTRODUCTORY NOTES 1.1 Scope This Standard covers the dimensional and physical properties and methods of testing for double coil helical spring lock washers for wood structures. NOTE: The word lock appearing in the name of the product in this Standard is a generic term historically associated with...
ASME B18.31-4M:2009 pdf download
ASME B18.31-4M:2009 pdf download.Threaded Rod (Metric Series) 1 INTRODUCTION This Standardcovers the complete generaland dimen- sional data for metric series threaded rod recognized as an American National Standard. This Standard is applicable to both fine and coarse metric series threads of diameters from M1.6 to M56, as indicated in Table 1. The inclusion of dimensional data in this Standard is...
ASME B18.18.2:2009 pdf download
ASME B18.18.2:2009 pdf download.Inspection and Quality Assurance for High-Volume Machine Assembly Fasteners 1 GENERAL INFORMATION 1.1 Basic Plan Structure This Standard outlines a Quality Assurance Plan for internally and externally threaded fasteners and acces- sories or associated parts. Provisions are included for sampling plans, inspection frequencies, control proce- dures, and record keeping. Included in this plan are fasteners such as...