ASME B30.28:2015 pdf download
ASME B30.28:2015 pdf download.Balance Lifting Units Volume B30.28 includes provisions that apply to the marking, construction, installation, inspection, testing, maintenance, and operation of balance lifting units (bal- ancers). Balancers are distinguished by their ability to float the load. This Volume applies to balancers with fixed arm support (Fig. 28-0.1-1) and balancers with overhead flexible lifting medium (Fig. 28-0.1-2). This Volume...
ASME B29.22:2001 pdf download
ASME B29.22:2001 pdf download.DROP FORGED RIVETLESS CHAINS, SPROCKET TEETH DRIVE CHAIN/DRIVE DOGS 2 DEFINITIONS drop forged rivetless chain: chain made from drop forged steel parts that are heat treated and are propor- tioned for high strength and comparative light weight. Its simple design permits assembly or dismantling by hand and this chain is available in three general types as illustrated...
ASME B18.29.2M:2005 pdf download
ASME B18.29.2M:2005 pdf download.Helical Coil Screw Thread Inserts: Free Running and Screw Locking (Metric Series) 1 GENERAL 1.1 Scope This Standard delineates the dimensional, mechani- cal, and performance data for the metric series helical coil screw thread insert and threaded hole into which it is installed. Appendices that describe insert selection, STI (screw thread insert) taps, insert installation, and removal...
ASME B18.13:2017 pdf download
ASME B18.13:2017 pdf download.Screw and Washer Assemblies — SEMS (Inch Series) 1 INTRODUCTION 1.1 Scope This Standard covers general and dimensional data pertinent to the various types of screw and captive washer assemblies, otherwise known as SEMS. SEMS products may include screws, tapping screws, or bolts in sizes No. 0 through 1 ⁄ 2 in. diameters in various grades and...
ASME B16-12:2009 pdf download
ASME B16-12:2009 pdf download.Cast Iron Threaded Drainage Fittings 1 SCOPE AND GENERAL 1.1 Scope This Standard for cast iron threaded drainage fittings covers (a) sizes and method of designating openings in reducing fittings (b) marking (c) material (d) dimensions and tolerances (e) threading (f) ribs (g) coatings (h) face bevel 1.2 Applicability This Standard covers fittings intended for use in...
ASME B16.12:2019 pdf download
ASME B16.12:2019 pdf download.Cast Iron Threaded Drainage Fittings 1 SCOPE AND GENERAL 1.1 Scope This Standard for cast iron threaded drainage fittings covers (a) sizes and method ofdesignatingopenings in reduc- ing fittings (b) marking (c) material (d) dimensions and tolerances (e) threading (f) ribs (g) coatings (h) face bevel 1.2 Applicability This Standard covers fittings intended foruse in gravity drainage...
ASME B16.42:2016 pdf download
ASME B16.42:2016 pdf download.Ductile Iron Pipe Flanges and Flanged Fittings 2 GENERAL 2.1 References Standards and specifications adopted by reference in this Standard are shown in Mandatory Appendix II, which is part ofthis Standard. Itis notconsidered practi- cal to identify the specific edition of each standard and specification in the individual references. Instead, the specific edition reference is identified in...
ASME B16.48:2020 pdf download
ASME B16.48:2020 pdf download.Line Blanks 1 SCOPE This Standard covers pressure–temperature ratings, materials, dimensions, tolerances, marking, and testing for operating line blanks in sizes NPS 1 ∕ 2 through NPS 24 for installation between ASME B16.5 flanges in the 150, 300, 600, 900, 1500, and 2500 pressure classes. 2 GENERAL 2.1 Definitions 2.1.1 Figure-8 Blank. A figure-8 blank (also called...
ASME B16.3:2021 pdf download
ASME B16.3:2021 pdf download.Malleable Iron Threaded Fittings 1 SCOPE This Standard covers malleable iron threaded fittings, Classes 150 and 300. It also contains provisions for using steel for caps and couplings in Class 150 for NPS 3 ∕ 8 and smaller. This Standard includes (a) pressure–temperature ratings (b) size and method ofdesignating openings ofreduc- ing fittings (c) marking (d) material...
ASME B16.42:2021 pdf download
ASME B16.42:2021 pdf download.Ductile Iron Pipe Flanges and Flanged Fittings 1 SCOPE This Standard covers minimum requirements for Classes 150 and 300 cast ductile iron pipe flanges and flanged fittings. The requirements covered are as follows: (a) pressure–temperature ratings (b) sizes and method ofdesignatingopenings ofreduc- ing fittings (c) marking (d) material (e) dimensions and tolerances (f) bolts, nuts, and gaskets...