ASME B16.24:2006 pdf download
ASME B16.24:2006 pdf download.Cast Copper Alloy Pipe Flanges and Flanged Fittings 1 SCOPE 1.1 General This Standard covers cast copper alloy threaded-joint pipe flanges and blind pipe flanges having rating class designations 150, 300, 600, 900, 1500, and 2500. This Standard also covers flanged fittings having rating class designations 150 and 300. It establishes requirements for (a) pressure–temperature ratings (b)...
ASME B16.15:2011 pdf download
ASME B16.15:2011 pdf download.Cast Copper Alloy Threaded Fittings 1 SCOPE This Standard covers cast Classes 125 and 250 copper alloythreaded pipefittings withprovisions forsubstitut- ing wrought copper alloys for plugs, bushings, caps, and couplings in small sizes. This Standard includes the following: (a) pressure–temperature ratings (b) size and method ofdesignating openings ofreduc- ing pipe fittings (c) marking requirements (d) minimum requirements...
ASME B16.18:2021 pdf download
ASME B16.18:2021 pdf download.Cast Copper Alloy Solder Joint Pressure Fittings 1 SCOPE This Standard establishes requirements for castcopper alloy solder joint pressure fittings designed for use by soldering or brazing with seamless copper water tube conforming to ASTM B88. Fittings made in accordance with this Standard are intended to be assembled with soldering materials conforming to ASTM B32, brazing materials...
ASME B18.2.2:2015 pdf download
ASME B18.2.2:2015 pdf download.Nuts for General Applications: Machine Screw Nuts, Hex, Square, Hex Flange, and Coupling Nuts (Inch Series) 1 INTRODUCTION 1.1 Scope 1.1.1 This Standard is intended to cover the com- plete general and dimensional data for the various types of inch series square and hex nuts, including machine screw nuts and coupling nuts, addressed by this Stan- dard....
ASME B16.24:2001 pdf download
ASME B16.24:2001 pdf download.CAST COPPER ALLOY PIPE FLANGES AND FLANGED FITTINGS: CLASSES 150, 300, 400, 600, 900, 1500, AND 2500 1 GENERAL 1.1 Scope This Standard for cast copper alloy pipe flanges and flanged fittings covers: (a) pressure temperature ratings; (b) sizes and methods of designating openings for reduced fittings; (c) marking; (d) materials; (e) dimensions; (f) bolts, nuts, and...
ASME B30.7:2021 pdf download
ASME B30.7:2021 pdf download.Winches The B30.7 Volume includes provisions thatapplyto the construction, installation, operation, inspection, testing, and maintenance of winches arranged for mounting on a foundation or other supporting structure for moving loads. Winches addressed in this Volume are those typi- cally used in industrial, construction, and maritime appli- cations. The requirements included in this Volume apply to winches that...
ASME B18-8-200M:2000 pdf download
ASME B18-8-200M:2000 pdf download.COTTER PINS, HEADLESS CLEVIS PINS, AND HEADED CLEVIS PINS (METRIC SERIES) 1 INTRODUCTORY NOTES 1.1 Scope 1.1.1 This Standard covers the complete dimensional and general data for cotter (split) pins recognized as an American National Standard. 1.1.2 The inclusion of dimensional data in this Standard is not intended to imply that all products described are stock production...
ASME B30.7:2006 pdf download
ASME B30.7:2006 pdf download.Base-Mounted Drum Hoists Within the general scope defined in Section I, B30.7 applies to base-mounted drum hoists arranged for mounting on a foundation or other supporting structure for lifting or lowering loads, to derrick swingers, and to any variations that retain the same fundamental char- acteristics. The scope includes hoists that are powered by internal combustion engines,...
ASME B31T:2015 pdf download
ASME B31T:2015 pdf download.Standard Toughness Requirements for Piping 2 GLOSSARY CVN: abbreviation for Charpy V-notch. design minimum temperature: the lowest component tem- perature expected in service. fully deoxidized steel: steel that has been deoxidized either by the addition of strong deoxidizing agents or by vac- uum treatment, to reduce the oxygen content to such a level that no reaction occurs...
ASME B29.8:2002 pdf download
ASME B29.8:2002 pdf download.LEAF CHAINS, CLEVISES, AND SHEAVES 1 LEAF CHAINS 1.1 Description A leaf chain consists of a series of link plates alternately assembled with pins in such a way that the joint is free to articulate between adjoining pitches. Typical assemblies are depicted in Figs. 1 and 2. 1.2 Numbering and Marking System The chain described in this...