ASME B16.49:2000 pdf download
ASME B16.49:2000 pdf download.FACTORY-MADE WROUCHT STEEL BUTTWELDING INDUCTI”‘ BENDS FOR TRANSPORTATION AND DISTRIBUTION SYSTEMS 1 SCOPE AND DEFINITIONS 1.1 General This Standard covers design, material, manufacturing, testing, marking, and inspection requirements for fac- tory-made pipeline bends of carbon steel materials having controlled chemistry and mechanical properties, produced by the induction bending process, with or without tangents. This Standard covers induction...
ASME B30.7:2016 pdf download
ASME B30.7:2016 pdf download.Winches The B30.7 Volume includes provisions that apply to the construction, installation, operation, inspection, test- ing, and maintenance ofwinches arranged for mounting on a foundation or other supporting structure for mov- ing loads. Winches addressed in this Volume are those typically used in industrial, construction, and maritime applications. The requirements included in this Volume apply to winches...
ASME B20.1:2006 pdf download
ASME B20.1:2006 pdf download.Safety Standard for Conveyors and Related Equipment 1 SCOPE This Standard applies to the design, construction, installation, maintenance, inspection, and operation of conveyors and conveying systems in relation to hazards. The conveyors may be of the bulk material, package, or unit-handling types, where the installation is designed for permanent, temporary, or portable operation. This Standard shall apply,...
ASME B16.9:2018 pdf download
ASME B16.9:2018 pdf download.Factory-Made Wrought Buttwelding Fittings 1 SCOPE 1.1 General This Standard covers overall dimensions, tolerances, ratings, testing, and markings for factory-made wrought buttwelding fittings in sizes NPS 1 ∕ 2 through NPS 48 (DN 15 through DN 1200). 1.2 Special Fittings Fittings may be made to special dimensions, sizes, shapes, and tolerances by agreement between the man- ufacturer...
ASME B16-36:2009 pdf download
ASME B16-36:2009 pdf download.Orifice Flanges 1 SCOPE This Standard covers flanges (similar to those covered in ASME B16.5) that have orifice pressure differential connections. Coverage is limited to the following: (a) welding neck flanges Classes 300, 600, 900, 1500, and 2500. U.S. Customary units are presented in Mandatory Appendix I. (b) slip-on and threaded Class 300. (c) welding neck flanges...
ASME B30.27:2005 pdf download
ASME B30.27:2005 pdf download.Material Placement Systems Volume B30.27 includes provisions that apply to the construction, installation, operation, inspection, and main- tenance of mobile material placing booms, mobile tele- scoping boom conveyors, separate placing booms, and material placement accessories (see Figs. 1 through 3). This Volume does not apply to the pumping ele- ments of a concrete pump, conveyors, mortar convey-...
ASME B16.23:2021 pdf download
ASME B16.23:2021 pdf download.Cast Copper Alloy Solder Joint Drainage Fittings: DWV 1 SCOPE This Standard establishes specifications for castcopper alloy solder joint drainage fittings, designed for use in drain, waste, and vent (DWV) systems. These fittings are designed for use with seamless copper tube conforming to ASTM B306, Copper Drainage Tube (DWV), as well as fittings intended to be assembled...
ASME B16.10:2017 pdf download
ASME B16.10:2017 pdf download.Face-to-Face and End-to-End Dimensions of Valves 1 SCOPE 1.1 General 1.1.1 Application. This Standard covers face-to-face and end-to-end dimensions of straightway valves, and center-to-face and center-to-end dimensions of angle valves. Its purpose is to ensure installation interchange- ability for valves of a given material, type, size, rating class, and end connection. Face-to-face and center-to- face dimensionsapplyto flangedendvalves...
ASME B16.1:2020 pdf download
ASME B16.1:2020 pdf download.Gray Iron Pipe Flanges and Flanged Fittings 1 SCOPE This Standardcovers Classes 25, 125, and250 GrayIron Pipe Flanges and Flanged Fittings. It includes (a) pressure–temperature ratings (b) sizes and method ofdesignatingopenings ofreduc- ing fittings (c) marking (d) materials (e) dimensions and tolerances (f) bolting and gaskets (g) pressure testing 2 GENERAL 2.1 References Standards and specifications adopted...
ASME B16.3:2016 pdf download
ASME B16.3:2016 pdf download.Malleable Iron Threaded Fittings 1 SCOPE This Standard covers malleable iron threaded fittings, Classes 150 and 300. It also contains provisions for using steel for caps and couplings in Class 150 for NPS 3 ⁄ 8 and smaller. This Standard includes (a) pressure–temperature ratings (b) size and method ofdesignating openings ofreduc- ing fittings (c) marking (d) material...