ASME B36.10M:2000 pdf download
ASME B36.10M:2000 pdf download.WELDED AND SEAMLESS WROUGHT STEEL PIPE 1 SCOPE This Standard covers the standardization of dimen- sions of welded and seamless wrought steel pipe for high or low temperatures and pressures. The word pipe is used as distinguished from tube to apply to tubular products of dimensions commonly used for pipeline and piping systems. Pipe NPS 12 (DN...
ASME B31T:2010 pdf download
ASME B31T:2010 pdf download.Standard Toughness Requirements for Piping 2 GLOSSARY CVN: abbreviation for Charpy V-notch. design minimum temperature: the lowest component tem- perature expected in service. fully deoxidized steel: steel that has been deoxidized either by the addition of strong deoxidizing agents or by vac- uum treatment, to reduce the oxygen content to such a level that no reaction occurs...
ASME B16.42:2011 pdf download
ASME B16.42:2011 pdf download.Ductile Iron Pipe Flanges and Flanged Fittings 1 SCOPE This Standard covers minimum requirements for Classes 150 and 300 cast ductile iron pipe flanges and flanged fittings. The requirements covered are as follows: (a) pressure–temperature ratings (b) sizes and method of designating openings of reducing fittings (c) marking (d) material (e) dimensions and tolerances (f) bolts, nuts,...
ASME B18.2.1:2010 pdf download
ASME B18.2.1:2010 pdf download.Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws (Inch Series) 1.1 Scope 1.1.1 This Standard covers the dimensional requirements for nine product types of inch series bolts and screws recognized as American National Standard. Also included are appendices covering gaging proce- dures, grade markings for bolts...
ASME B16.18:2012 pdf download
ASME B16.18:2012 pdf download.Cast Copper Alloy Solder Joint Pressure Fittings 1 SCOPE This Standard for cast copper alloy solder joint pres- sure fittings designed for use with copper water tube establishes requirements for (a) pressure–temperature ratings (b) abbreviations for end connections (c) sizes and method of designating openings of fittings (d) marking (e) material (f) dimensions and tolerances (g) tests...
ASME B18.2.1:2012 pdf download
ASME B18.2.1:2012 pdf download.Square, Hex, Heavy Hex, and Askew Head Bolts and Hex, Heavy Hex, Hex Flange, Lobed Head, and Lag Screws (Inch Series) 1.1 Scope 1.1.1 This Standard covers the dimensional requirements for nine product types of inch series bolts and screws recognized as American National Standard. Also included are appendices covering gaging proce- dures, grade markings for bolts...
ASME B20.1:2021 pdf download
ASME B20.1:2021 pdf download.Safety Standard for Conveyors and Related Equipment 1 SCOPE ThisStandardappliestothedesign,construction,instal- lation, maintenance, inspection, and operation of conveyors and conveying systems in relation to hazards. The conveyors may be of the bulk material, package, or unit-handling types, where the installation is designed for permanent, temporary, or portable opera- tion. This Standard shall apply, with the exceptions noted below,...
ASME B30.18:2021 pdf download
ASME B30.18:2021 pdf download.Stacker Cranes Volume B30.18 includes provisions that apply to the construction, installation, operation, inspection, and maintenance of hand-powered and power-driven over- head and gantry cranes that have a top or under running multiple girder bridge with a vertically guided carriage, with or without a top or under running trolley. The requirements included in this Volume also apply...
ASME B30.26:2004 pdf download
ASME B30.26:2004 pdf download.Rigging Hardware Volume B30.26 includes provisions that apply to the con- struction, installation, operation, inspection, and mainte- nance of detachable rigging hardware used for lifting pur- poses in conjunction with equipment described in other volumes of the B30 Standard. This hardware includes shackles, links, rings, swivels, turnbuckles, eyebolts, hoist rings, wire rope clips, wedge sockets, and rigging...
ASME B30.24:2013 pdf download
ASME B30.24:2013 pdf download.Container Cranes Volume B30.24 includes provisions that apply to the construction, installation, operation, inspection, testing, and maintenance of container cranes used for lifting purposes, in conjunction with equipment described in other volumes of the B30 Standard. This Volume includes power-operated cranes ofthe above type whose power source is either self-contained or provided exter- nally; single, double,orboxgirderconstruction, utilizing...