ASME A112.19.10:2017 pdf download
ASME A112.19.10:2017 pdf download.Retrofit Dual Flush Devices for Water Closets 1 GENERAL 1.1 Scope This Standard establishes physical, material, testing, and marking requirements for retrofit dual flush devices that are installed within gravity-type water closet tanks and have a full flush volume of 4.8 Lpf (1.28 gpf) or greater volume. 1.2 Units of Measurement The values stated in either SI...
ASME A13.1:2020 pdf download
ASME A13.1:2020 pdf download.Scheme for the Identification of Piping Systems 1 OBJECT AND SCOPE ThisStandardisintendedtoestablishacommonsystem to assistinidentificationofhazardous materials conveyed in piping systems and the materials’ hazards when released in the environment. This scheme concerns identification of contents of piping systems. It is recommended for the identification of piping systemsuse dinindustrial, commercial, andinsti- tutional installations, and in buildings used for public...
ASME A112.18.8:2020 pdf download
ASME A112.18.8:2020 pdf download.Sanitary Waste Valves for Plumbing Drainage Systems 1 GENERAL 1.1 Scope This Standard establishes minimum requirements for materials in the construction of a sanitary waste valve (here- inafter referred to as “the valve”) for use as an alternate to a tubular p-trap. This Standard prescribes minimum test requirements for the performance ofthe valve together with methods ofmarking...
ASME B5.47:1972(R2018) pdf download
ASME B5.47:1972(R2018) pdf download.Milling Machine Arbor Assemblies 1. Scope 1.1 The standard is confined to milling machine arbors. The reason for confining this standard to this specified milling machine accessory is that through many years of development and general usage, there aiready exists good agreement on the structure and dimensions of milling machine arbors between competent manufacturers of such equipment...
ASME A112.6.3:2019 pdf download
ASME A112.6.3:2019 pdf download.Floor and Trench Drains 1 GENERAL 1.1 Scope This Standard covers floor, area, adjustable floor, and trench drains thatare used inside of, oroutside and immediately adjacentto, buildingstructures. This Standard specifies design requirements, definitions, nomenclature, outlettypes and connections, grate-opening areas, top-loading classifications, materials, and finishes. 1.2 Stainless Steel Fabricated Drains Seam-welded, socket-type, stainless steel fabricated drains are covered...
ASME AED-1:2018 pdf download
ASME AED-1:2018 pdf download.Aerospace and Advanced Engineering Drawings 1 GENERAL 1.1 Scope This Standard provides a method to document requirements that are common across aerospace and other industries thatuseadvancedmanufacturingtechnologies.ThisStandardofferssymbologies,terminologies,andconceptstoenhance the understanding and abilities of those who create and use design documentation. 1.2 Conventions The conventions in paras. 1.2.1 through 1.2.10 are used in this Standard. With the exception of the...
ASME B5.35:1983(R2018) pdf download
ASME B5.35:1983(R2018) pdf download.Machine Mounting Specifications for A,brasive Discs and Plate Mounted Wheels 1 PURPOSE To provide standards to be used in the design of machine face plates matching the location of nuts, washers, studs of abrasive discs, or plain or tapped holes of plate mounted wheels. 2 SCOPE This Standard covers ANSI Standard practice for location and size of...
ASME A112.14.3:2018 pdf download
ASME A112.14.3:2018 pdf download.Hydromechanical Grease Interceptors 1 GENERAL 1.1 Scope This Standard covers general product requirements as well as the performance criteria for the testing and rating ofhydromechanical grease interceptors, rated by flow in gallons per minute (gpm) or liters per minute (L/min). 1.2 Units of Measurement Values are stated in U.S. Customary units and in the International System of...
ASME A112.1002:2020 pdf download
ASME A112.1002:2020 pdf download.Anti-siphon fill valves for water closet tanks 1 Scope 1.1 This Standard covers anti-siphon fill valves intended to be installed in water closet tanks. Note: In this Standard, anti-siphon fill valves are also referred to as “devices”. 1.2 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to...
ASME B18.2.2:2022 pdf download
ASME B18.2.2:2022 pdf download.Nuts for General Applications: Machine Screw Nuts; and Hex, Square, Hex Flange, and Coupling Nuts (Inch Series) 1 INTRODUCTION 1.1 Scope 1.1.1 This Standard is intended to coverthe complete general and dimensional data forthe types ofinch series square and hex nuts, including machine screw nuts and coupling nuts (see Tables 1.1.1-1 through 1.1.1-15). Also included are appendices...