Oct,05

IEC 61228:2020 pdf download

IEC 61228:2020 pdf download

IEC 61228:2020 pdf download.Fluorescent ultraviolet lamps used for tanning – Measurement and specification method
1 Scope
This document describes the method of measuring, evaluating and specifying the UV irradiation characteristics of fluorescent ultraviolet lamps that are used in appliances for tanning purposes. It includes specific requirements regarding the marking of such lamps. These requirements relate only to type testing. Lamps complying with the requirements of this document comply with the electrical and mechanical safety requirements of IEC 61195 and IEC 61199 with the exception of the requirements for maximum limits of UV radiation.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60061-1, Lamp caps and holders together with gauges for the control of interchangeability and safety – Part 1: Lamp caps IEC 60081, Double-capped fluorescent lamps – Performance specifications IEC 60155, Glow-starters for fluorescent lamps IEC 60335-2-27, Household and similar electrical appliances – Safety – Part 2-27: Particular requirements for appliances for skin exposure to optical radiation IEC 60921, Ballasts for tubular fluorescent lamps – Performance requirements IEC 60929, AC and/or DC-supplied electronic control gear for tubular fluorescent lamps – Performance requirements IEC 61049, Capacitors for use in tubular fluorescent and other discharge lamp circuits. Performance requirements ISO/CIE 28077:2016, Photocarcinogenesis action spectrum (non-melanoma skin cancers) ClE 63:1984, The spectroradiometric measurement of light sources
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.ISO and IEC maintain terminological databases for use in standardization at the following addresses:IEC Electropedia: available at http://www.electropedia.org/ ISO Online browsing platform: available at http://www.iso.org/obp 3.1 ultraviolet lamp lamp which radiates especially strongly in the ultraviolet, the visible radiation produced, if any, not being of direct interest [SOURCE: IEC 60050-845:1987, 845-07-52, modified – Note deleted.] 3.2 fluorescent lamp discharge lamp of the low-pressure mercury type in which most of the light is emitted by one or several layers of phosphors excited by the ultraviolet radiation from the discharge [SOURCE: IEC 60050-845:1987, 845-07-26, modified – Note deleted.] 3.3 spectroradiometer instrument for measuring radiometric quantities in narrow wavelength intervals over a given spectral region [SOURCE: IEC 60050-845:1987, 845-05-07] 3.4 bandwidth at a given wavelength width at half-amplitude points of the transmittance function of a monochromator Note 1 to entry: The bandwidth is expressed in nm. 3.5 spectral adjective that, when applied to a quantity X pertaining to electromagnetic radiation, indicates: – either that X is a function of the wavelength λ, symbol: X(λ); – or that the quantity referred to is the spectral concentration of X, symbol: X λ = d X/dλ. X λ is also a function of λ and in order to stress this, it may be written X λ (λ) without any change of meaning [SOURCE: IEC 60050-845:1987, 845-01-16, modified – Note deleted.] 3.6 irradiance quotient of the radiant flux dφ e incident on an element of the surface containing the point, by the area d A of that element Note 1 to entry: Irradiance is expressed in W/m 2 . [SOURCE: IEC 60050-845:1987, 845-01-37, modified – Domain and equivalent definition deleted.]3.7 action spectrum efficiency of monochromatic radiations for producing a specified phenomenon in a specified system [SOURCE: IEC 60050-845:1987, 845-06-14, modified – Definition revised.] 3.8 effective adjective that, when applied to a quantity pertaining to electromagnetic radiation, indicates that the quantity referred to is weighed according to a specified action spectrum 3.9 nominal value approximate quantity value used to designate or identify a lamp [SOURCE: IEC 60050-151:2001, 151-16-09, modified – Definition revised and note deleted.] 3.10 rated value quantity value for a characteristic of a lamp for specified operating conditions Note 1 to entry: The value and/or conditions are specified in this document or assigned by the manufacturer or responsible vendor. 3.11 irradiance maintenance ratio r rated value of the ratio of the effective UV irradiance weighed according to the erythema action spectrum (250 nm to 400 nm) at a specified time to initial values 3.12 initial value electrical and radiometric characteristics measured at the end of a 5 h ageing period

Download
The previous

IEC 60779:2020 pdf download

The next

IEC 61547:2020 pdf download

Related Standards